beatupchevy answered about a year ago
You would have to connect with the computer with code reader , if you can't or if there's a problem then it may have gone dead from sitting without power while you replaced the motor . Scan for codes , check for proper spark , fuel pressure , injector pulse
Did you disarm the security system? When the battery is disconnected the security goes into full lockdown.
I put a new motor in my truck now it just cranks and will not start do I have to program the computer
2002 Dodge RAM 1500 SLT Quad Cab RWD
-
Maintenance & Repair
Last nite I was driving my truck it started smoking really bad. Now it will not do anything except make a horrible noise when I start it.
Dodge RAM 1500
-
Maintenance & Repair
Truck won't start, lights come on, will not turn over but there's a clicking sound coming from under fuse box
Dodge RAM 1500
-
Maintenance & Repair
My truck will not start. Power on and lights etc working but not cranking over. Cleaned battery terminals still nothing. I can hear a click when I try to turn over but not in engine bay. The sound i...
Dodge RAM 1500
-
Maintenance & Repair
I was driving down the highway everything was fine then suddenly my check gages light came on the oil gage went down to red line then the engine shut down now it will not start. There is oil in it.
2007 Dodge RAM 1500 SLT Quad Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.