why would car not be firing
had head on car resurfaced and put ball back together and set time went to crank the car and it would not crank,so i checked the firing on number 1 cylinder and no fire from plug wire
Asked by Edward Nov 16, 2012 at 11:38 PM about the 2000 Toyota Camry LE
Question type: Maintenance & Repair
had head on car resurfaced and put ball back together and set time went to crank the car and it would not crank,so i checked the firing on number 1 cylinder and no fire from plug wire
santapaws1 answered 11 years ago
do you have a crank sensor or cam sensor disconnected?
had head on car resurfaced and put ball back together and set time went to crank the car and it would not crank,so i checked the firing on number 1 cylinder and no fire from plug wire
2000 Toyota Camry LE
-
Maintenance & Repair
My 2002 Toyota Camry isn't firing, it acts like it's not getting fuel but the pump is working, what can be the issue?? It just shut off on me and wouldn't start
2002 Toyota Camry LE
-
Maintenance & Repair
I have a Toyota Camry 2007 and yesterday as I was leaving work, I pressed on the accelerator and it wouldn't accelerate but the rpm would go up and once it would hit 5 rpm it would make a somewhat...
2007 Toyota Camry LE
-
Maintenance & Repair
Driving about 20 mph and turning, instrument panel turned all red, car died, returned to normal in a second. 3/4 gas tank, less than 2,000 miles.
2020 Toyota Camry LE AWD
-
Maintenance & Repair
My brother just recently replaced the ignition in my car it is now having issues no windows no radio no instrument gauge cluster no inside lights the cigarette lighter basically all power on the in...
2000 Toyota Camry LE
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.