That is not a cover, the taillight is an assembly, sold as one piece. you can order it on line or through any of the parts stores. lift your hatch. look on both sides and you will see large plastic nuts that you turn by hand. remove those nuts, remove the panel and you will see I think 3 more nuts, remove those and they will release the whole taillight to the outside, unplug all 3 wiring harnesses, (use a small flathead screwdriver to release the plugs) plug into the new taillight assembly.
I am attempting to remove cracked glass/plastic cover on tail light assembly. I am not replacing the bulbs, just the cover. Can' seem to get it off.
1997 Toyota 4Runner 4 Dr SR5 4WD SUV
-
Maintenance & Repair
How do I remove and replace the tail light assembly on my 1996 4runner? It seems to be attached by two phillips-head screws but when I remove these, it will not come off. There is clearly a trick tha...
1996 Toyota 4Runner
-
Maintenance & Repair
Attempting to remove glass/plastice cover on tail light assembly. Have it off the car but can't remove it?
1997 Toyota 4Runner 4 Dr SR5 4WD SUV
-
Maintenance & Repair
the car was down for over a month to replace head gaskets and the timing belt I set it to TDC with the camshaft also.I have no alarms. it runs but not smooth
1994 Toyota 4Runner
-
Maintenance & Repair
I tried to replace the bulb in my left front turn signal. Hard to get to due to battery location, but I managed to get the socket out of the plug. Could not get the bulb out of the socket -- really ...
2008 Toyota 4Runner SR5 V8 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.