1991 ford ranger 4x4 2.9L theres brake fluid on the bell housing when clutch is engage im thinking its the slave cylinder going bad, is there any easier way to remove the slave from inside of the bell

1991 ford ranger 4x4 2.9L theres brake fluid on the bell housing when clutch is engage im thinking its the slave cylinder going bad, is there any easier way to remove the slave from inside of the bell 1 Answer

on a 1997 ford ranger 4.0 enging 5 speed manull transmisions i put new cluth presure plate and slave cylinder and resavore still cant get a clutch pedal to ingage the p plate and also bleed it 1 Answer

still want press p plate is there a diffrents in internal slave cylinder between one for 4 cylinder and v6

Is my slave cylinder bad 3 Answers

I just changed my clutch master cylinder but before I done so the pedal stuck to the floor. Now that I changed my clutch master cylinder I get very slow return of the pedal. Could that be that my...

I have a 1987 Ford Ranger 2.9L, manual with Hydrolic clutch. Does it mean that I need to replace the clutch if the only engage / disengage position for the pedal is at the top 1/8th of redal travel?Paulptw7172@gmail.com 3 Answers

Does it mean that I need to replace the clutch if the only engage / disengage position for the pedal is at the top 1/8th of redal travel? Paul ptw7172@gmail.com

Slave cylinder 1 Answer

Bleeding the slave. cylinder