If you can't make repairs to the wire harness, then replace it, find the same make/model & year in a scrap yard and salvage a harness from it. It can be tricky trying to patch a harness back together, splices should be soldered and sealed with heat shrink tubing. If you decide to replace the harness (which I recommend) make sure the replacement is IDENTICAL, even minor differences can make it incompatible.
Some squirrels ate my wires as shown on pic what are those called and its also stop me from accelerating
2003 Ford Expedition Eddie Bauer 4WD
-
Maintenance & Repair
Where is the fuel pump switch located on a 2004 Ford Expedition
2004 Ford Expedition XLT
-
Maintenance & Repair
Truck revs up and down in idle. What can cause this?
2003 Ford Expedition XLT 4WD
-
Maintenance & Repair
A few months back my 2000 expedition wouldn't start so I used the old hose and a 2 liter and ran it to throttle body it ran then I hit a large hole in road after hitting bump in road I turned tru...
2000 Ford Expedition Eddie Bauer
-
Maintenance & Repair
My truck used to stall once in I while and now is doing it more frequently while I'm driving. The battery light and hi temp low oil lights come on. The battery was tested and is fine and I recently...
2003 Ford Expedition Eddie Bauer 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.
