meanoldmoe answered 14 years ago
make sure switches are good in the steering column . check for good contact down to the harness attachment near the bottom of the steering column. Use an ohm meter to check for continuity between switches at top , and wire harness connector at the bottom.
fuse is good but cruise does not work
1993 Ford Aerostar XL Plus Passenger Van RWD
-
Maintenance & Repair
Recently noticed part of the upper control arm needed to be replaced on my van. I do not need the upper control arm but the adjusting arm and mounting brackets that it is assembled to. The diagrams ...
1995 Ford Aerostar XLT Passenger Van Extended RWD
-
Maintenance & Repair
where is the engine control module located
1995 Ford Aerostar XLT Passenger Van Extended AWD
-
Maintenance & Repair
cruise control stopped working on 2002 ford crown vic. base
2002 Ford Crown Victoria STD
-
Maintenance & Repair
Hello. I changed my power brake booster on my 2003 ford expedition XLT 4.6L and now my cruise control is not working. Any suggestions on how I can get this back working. When I had the old Brake Boost...
2003 Ford Expedition XLT
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.