Santro cooling never stop once it becomes hot

Asked by johnsalam707 Jun 05, 2018 at 06:32 PM

Question type: Maintenance & Repair

my santro 2009 xing car coolant was leaking
totally so i refill some cold water just to reach
home but then everything was fine so far except
the coolant leakage. The next day i replace faulty
leakage spare. But nw when engine is hot fan
starts & never stop. Pls advise me for the
cause.thnks waiting fr the reply.

34,290

charles answered 5 years ago

Sounds like there's air still in the system,try bleeding again.

Mark helpful

64,520

firebird338 answered 5 years ago

To bleed remove cap from overflow tank fill with antifreeze to full mark leave cap off and start vehicle and let idle once vehicle starts to reach operating temp thermostat will start to open and antifreeze level will drop in tank fill back to full mark then put cap back on. You will also notice antifreeze in tank will start to fill up this is normal will go back down when thermostat starts to open.

Mark helpful