2004 Ram 1500, the "LampOut" light is on, the rear passenger turn signal is the only one that works and I've replaced all of the bulbs. Passenger headlight only works on low and the drivers headlight only works on high. I'm not sure about the headlights but the turn signals worked one day and then didn't the next. Ideas?

2004 Ram 1500, the "LampOut" light is on, the rear passenger turn signal is the only one that works and I've replaced all of the bulbs. Passenger headlight only works on low and the drivers headlight only works on high. I'm not sure about the headlights but the turn signals worked one day and then didn't the next. Ideas? 1 Answer

With the key off the three brake lights work correctly when the brake pedal is depressed. With the key on the two rear brake lights stay on all the time and the third brake light works correctly when the pedal is depressed. Also, The cruise control does not work. This all started after had the dash appart trying to repair a problem with the defroster. The brake light switch was replaced to no avail 2 Answers

With the key off the three brake lights work correctly when the brake pedal is depressed. With the key on the two rear brake lights stay on all the time and the third brake light works correctly when ...

What is the problem with my 1983 dodge ram pickup truck D150? When I turn the head lights on, all of my gauges go to the high end, my left blinker stays lit on the dash & my dash lights go out. 1 Answer

Had wiring done already. Problem started again. Turn off headlights, all gauges return to normal position. The driver's seatbelt also buzzes when it's not clicked. It's never did this before. Hea...

what is the price on replace rear main seal 3 Answers

replace rear main seal

Does a 1990 and a 1995 dodge 318 have the bolt locations in the same spot.can I put alternator and all pulleys from the 90 on the 95 2 Answers

I can get a 1995 dodge 318 out of a dodge van in order to get it to work ,I am wondering if my timing chain cover and all bolt locations will be in the same spot on both motors so I can use all my ...