Should be on the frame between the tank and engine. Usually under the door. Start at the tank and follow it towards the engine. When you find it soak it off and on for a day or so with a penetrating oil (P.B. blaster, wd40). It will help with removing the nuts because you do not want to round off the nuts on the fuel line. Rent or borrow a line wrench if you can. Autozone rents tools.
Need to know where its located
Ford Bronco II
-
Maintenance & Repair
heater core replacement on my 86 ford bronco 2 v6. How to do this.
1986 Ford Bronco II
-
Maintenance & Repair
i have a 88 ford bronco II XLT with vent windows - non power window - and Im wondering how to replace the window seals . I bought a brand new clip on type set of seals !!!
1988 Ford Bronco II
-
Maintenance & Repair
My brother has an 88 bronco 2 that will not start when you turn the key. He has replaced the starter solenoid and the fuel pump turns on but when he turns the key it wont even crank.
1988 Ford Bronco II XLT 4WD
-
Maintenance & Repair
Truck was running fine had a leak in line took line off put new line on now it want let gas go to the rail
Ford Bronco II
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.