Where do you fill gear box oil in rocam engine
9 Answers
Brandon-lee answered 8 years ago
How to fill the gearbox oil on a ford bantam
There is a pipe from cluch buster that gous down to gear box. Pull it up from g box u will see a hole
If these gear boxes are over filled it will cause the gear oil to froth up. The gear box will only need topping up if there is an oil leak. Check the drive shaft oil seals for a start.
How to fill the gearbox oil
There is a plug on the front side of the gearbox. This is the check bore hole. This is also the filler hole as well. On the Gearbox oil container is a pipe that gets pulled out, Squeeze the oil from the plastic container or bottle, the oils will go out of the plasic container through the pipe into the gear box. Remove the front cover of the transmission that will expose where the filler hole is.
I want to blid it the gear is block in numbe four