Ford Bantam advice please

Asked by Hugo Oct 19, 2023 at 03:34 PM about the Ford Bantam

Question type: Maintenance & Repair

Have just replaced my 1300 engine with a "low milage
import" engine
Do I need to re-program the ECU unit?Car is a 2010
model.
I am in Sasolburg Freestate

16,535

Guru97FK8 answered 6 months ago

We car do this . We have done plenty of them. If you have fitted an "Import" engine to a 2010 Bantam, you must make sure you have the original Flywheel for your vehcle on the engine as the "New" engine's Crank shaft Sensor pick up has 36 minus 1 tooth on the flywheel. From 2008 to 2012 the Flywheel has 36 minus 2 Teeth. What will happen with the flywheel from the import engine, it will crank but not start. To convert your 1.3 ECU to 1.6, We do them. Please phone / Whatsapp us om : 0820606425. We are based in Pretoria East,

Mark helpful

16,535

Guru97FK8 answered 6 months ago

Is this "New" engine a 1300 or 1600. ?

Mark helpful