Ford bantam electrical troubleshoot

Asked by Jacquesxlt May 23, 2020 at 01:04 AM about the Ford Bantam

Question type: Maintenance & Repair

Before a fire hazard accrued l was
driving around and my hazards
starting to indicate and would not go
off ,my gages stop working my
bakkie was doing its own thing and
burst into flames !!! I saved most of
the pickup to find that there are a
electrical cable that’s splits to
different apartments there is a white
plastic cable insert that joins the
cable that goes into the bakkie ,can l
repair just that part of cable and by
pass that insert that burnt it’s like
30cm hat burnt and the bottle so can
l rewire those cables without the
cable connector

16,465

Guru97FK8 answered 3 years ago

The wiring harnesses are what you call, "Modular". They come in sections. I would hunt arround scrap yards for the sections you need. You could remove that particular section and repair it so long as you use that particular diameter wiring. It sounds like there was a short circuit in that section. There should have been a fuse or fusable link to protect that system.

Best Answer Mark helpful

16,465

Guru97FK8 answered 3 years ago

Please find below links for 2002 Bantam workshop Manuals and Wiring Diagrams. These diagrams can be down loaded onto you PC https://www.manualslib.com/manual/1106266/Ford-2002-Bantam.html#manual https://elektrotanya.com/ford_bantam_2002_wiring_diagrams.pdf/download.html

1 people found this helpful.

Mark helpful