2010 Ford Bantam faulty fuel gauge

The section is under Ford Bantam, you have to click on the seach twice. No problem ! Perform a cluster self test : Ignition OFF, press the ODO trip button in and hold it there, then IGN switch on and hold the trip button in and check that TEST comes up on the LCD display. Press the ODO trip button , the Speedo and RPM dials will move to full sweep and back to zero, press the trip button again and the fuel and temp buttons will go to full and off, Some ware as you press the trip button it will show you Fuel. that will be the resistance in the fuel gauge in the tank. When the engine is idling, is there a slight hesitation every about seven seconds ? If there is this will indicate there is a communication problem between the PCM and the cluster. Check the fuses and the relays first and then check the wiring.

Hi , thank you so much for your help. I will need to try this when i get home this afternoon .I did check the fuses already and they all look fine. I didnt hear or feel any resistance when the van is idling , but i think i should listen a bit closer , now that i know what to look out for..Thanks again for your help .