1971 Ford Econoline camper with 302 hesitates and sputters when gas pedal is pressed.
15

Asked by bullys50 Aug 12, 2015 at 09:13 AM about the 1971 Ford Transit Cargo

Question type: Maintenance & Repair

I have a 1971 Ford Econoline 300 with a 302. The problem is when I give it gas it will
hesitate to the point the engine dies. If i feather the throttle it will get apst that point
and runs great. I put a rebuilt kit in the carburetor, and it idels nice and smoothe, and
plenty of power once you get past that pause. The camper hasn't been really driven for
about 6 years, just to move it so I could mow around it. The carb was leaking gas from
the accelerator pump before the rebuild. It doesn' t leak any more and seems to run
real nice except for that pause when you step on the gas. If  you step on the gas
pedal, it will stall to the point that will back fire and kill the motor. I have replaced the
points, condensor, rotor and spark plugs as well as rebuilding the carb. Float level has
been rechecked and as well as the float seat. Any ideas would be greatly appreciated.

5 Answers
188,355

Paul answered 8 years ago

Have you checked for a vacuum leak? if no vac leaks sounds like you are having a fuel delivery problem, it was sitting for 6 years maybe the fuel pump is no good. Did you remove the old gas and fill it with new?

Mark helpful
44,825

jamnblues answered 8 years ago

Your carb is not transitioning from idle-I think it's time for a new carb- get the right one and you will get better mileage, too- get a pro to do it and he can set it up right-

Mark helpful
44,825

jamnblues answered 8 years ago

and yes, on something that old, pull the gas tank and check for corrosion before you put a new carb on it-

Mark helpful
15

bullys50 answered 8 years ago

Thanks for the get backs. I have put a new fuel pump on not that long ago due to a broken hose that i didn't know about until i put the new fuel pump on and still no fuel, and then found the broken fuel hose. And i have fresh fuel in the tank, Just thinking i missed something when i did the carb rebuild. My first thought was the accelerator pump, but went back and checked it and as far as i can tell everthing looks good and assembled per the instruction sheet. One thing I'm wondering is when iI look down the throat of the carb and run the the linkage, shouldn't i see a stream of gas shooting into the openings? Thanks again for the help.

Mark helpful

Your Answer:

Related Questions

Transit Cargo

Looking for a Used Transit Cargo in your area?

CarGurus has 1,063 nationwide Transit Cargo listings starting at $11,975.

Postal Code:

Shortcuts

Search Ford Transit Cargo Questions

CarGurus Experts

  • #1
    Bob Beaman
    Reputation
    50
  • #2
    James Taylor
    Reputation
    30
  • #3
    james sparrow
    Reputation
    20
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.