2007 3.5 v6 Dodge Charger.. ..4th cylinder has no PSI.. checked all the little things.. what do I do now?
8 Answers
Oops that's an interference engine. If timing belt broke or it jumped time you will most likely have bent valves. How many miles on it? Timing belt should have been changed at 105k. Sounds like you bent a valve. The psi you are talking about is from doing a compression check correct?
155+ miles.. not sure if timing belt was changed.. PSI from compression check, yes. Can get motor rebuilt for 2k but not sure if it's worth it
If only a valve issue I would just do the heads and timing belt items. Replace bad valves reinstall and you back on the road.
Bottom end of engine will be fine as is. But if there is a piston issue(cracked) in that cylinder it will be visible when head is removed and then you can worry about the bottom end. But most likely it's only the valves.
Sorry been out of town. Click on my avatar and from there you can send me a private message to my inbox.
I have a 2010 dodge charger that jumped time when the waterpump locked up and broke timing belt. I ordered the waterpump/timing belt kit and it crunk right up but it has a light vibration like its missing. Do you think it could still be a bent valve?
Lover123boy answered 4 years ago
I have a 2007 Dodge Charger sxt and they Sade there is no Compression on five and six I have 50 percent on compression on three and four an full on one do you think I need a motor or rebuild it
