not getting power to air pump
Asked by scripmanb Nov 23, 2013 at 02:58 PM about the 2002 Mercedes-Benz S-Class
Question type: Maintenance & Repair
i replaced the front struts then had noise so changed upper control arm after that pump wouldnt work so dealer told me bad pump replaced it and new relay fuses under hood are good but still no power to pump
6 Answers
migration_judge_roy answered 10 years ago
you've got to get in there with an ohm meter to see if the pump has electrical continuity~ if it does, measure the connector for the presence of 12 volts~
migration_judge_roy answered 10 years ago
kink or break in the wire...traverse it's length to find the kink~
Thanks alot found the break in the line. Got the pump running. If you wouldnt mind got another issue the passenger side is to high. What would be the problem there.
migration_judge_roy answered 10 years ago
check for a restriction in the piping...crimped during repairs?
migration_judge_roy answered 10 years ago
...the "manifold" as it were is not distributing the pressures correctly...see if you can spot an obstruction...perhaps a bolt that is too long mountin' the thing~
i took the lines off of the block not sure if they are in the right places
