check the ECM fuse,if blown it wont send power to FP.
I had to drop fuel tank and clean because of sitting to long, old fuel turpentined or went bad, however you want to put it. Changed fuel filter, can't get fuel to injectors. What do I need to do?
I changed the fuel pump on my Bronco II and haven't been able to get it started since. Do I have to prime the system or ???
1987 Ford Bronco II
-
Maintenance & Repair
My daughter's 88 Bronco 2 has been idling a bit rough and sometimes low. It wouldn't start the other night while she was shopping. Had it towed home after driving to the mall and checking the us...
1988 Ford Bronco II STD 4WD
-
Maintenance & Repair
My 1986 Bronco II is having starting problems! I can pull the map sensor hose loose an it will start right up...but if you try to reconnect the hose it will die. If I start with the map sensor lo...
1986 Ford Bronco II XLT
-
Maintenance & Repair
We replaced a faulty sending unit and now it won't start. We can hear both fuel pumps, but there is no pressure at the rail. We had previously replaced the fuel
1987 Ford Bronco II XL
-
Maintenance & Repair
I have a 84 bronco ii it runs good idle is fine but when you give it gas it will bog but if you slowly give it gas it will rev up like how it should has a differnt 2 b carb that was just rebuilt ha...
1984 Ford Bronco II XLT 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.