I relaced the cluch last year and when I got it out of storage this year the cluch was spongy and went all the way to the floor. My resivior was empty so I filled it and that didn't change the problem. Any suggestions?

I relaced the cluch last year and when I got it out of storage this year the cluch was spongy and went all the way to the floor. My resivior was empty so I filled it and that didn't change the problem. Any suggestions? 1 Answer

My car motor recently started shaking and i have no power on each shift,??it was fine before i change the power steering pump and got an oil change on it..why might this be happening ? 3 Answers

It was very strong and even burn rubber on second gear...!

I am having problems with the amount of gas flowing through the injectors, not sure if it is not getting enough air, or if the fuel pressure regulator has been damaged. i just got cap, rotor cables and new sparkplugs put in, any suggestions? 3 Answers

I am having problems with the amount of gas flowing through the injectors, not sure if it is not getting enough air, or if the fuel pressure regulator has been damaged. i just got cap, rotor cables a...

I have a 1986 Nissan 300 zx the fuel pump went out on it and i ordered another one but it looks nothing like what i took out? 3 Answers

The one i took out is in a metal cylinder thing like a paint spray can with a thin metal strip that runs down in it. The one i ordered looks a lot different with places for hoses and a black and red...

I just ran out of gas in my 1986 Nissan 300ZX today and when I put gas in it it gets up to 22 rpms and wants to go back down until I step on the gas peddal again %2C what is wrong%3F 1 Answer

I just ran out of gas in my 1986 Nissan 300ZX today and when I put gas in it it gets up to 22 rpms and wants to go back down until I step on the gas peddal again , what is wrong?