What's the foot pound pressure on the belt.

Asked by steels Oct 27, 2014 at 02:31 PM about the 1989 GMC Sierra 1500

Question type: Maintenance & Repair

Out of the blue started shredding
belts. Pulleys in line an free of Burs an
dirt.

143,745

T_S_T answered 9 years ago

It has it,s on tentioner,it will be the tenttioner idler bad,or one of the idler pulley,s it self.

Mark helpful

143,745

T_S_T answered 9 years ago

1

Mark helpful

Your Answer:

What's the foot pound pressure on the belt. 2 Answers

Out of the blue started shredding belts. Pulleys in line an free of Burs an dirt.

1989 GMC Sierra 1500

-

Maintenance & Repair
where is the fuel pressure regulator located on a 1991 GMC C1500 Sierra truck 1 Answer

where is the fuel pressure regulator located on a 1991 GMC C1500 Sierra truck

1991 GMC Sierra 1500 C1500 Extended Cab LB

-

Maintenance & Repair
where is the fuel pressure regulator valve on gmc 2001 ext cab 4x4 1 Answer

i need a pic or pics of the wiring of the rear brake lights ...truck was running rough missing and jerking acting like had water in gas....stalled out and now will not start at all i was repairing t...

2001 GMC Sierra 1500 SLT 4WD Extended Cab LB

-

Maintenance & Repair
how do you cover the hole thats on the side seat belt panel that bolts to the body? 5 Answers

I just removed the seat belts in my 1994 sieerra 1500 and the hole where the seat belt that conects to the cars body by your head is pretty big and anoying and i was wondering what and how do you fi...

1994 GMC Sierra 1500 C1500 SLE Extended Cab SB

-

Maintenance & Repair
04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer

died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...

2004 GMC Sierra 1500

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.