Suggestions on updating my '80 Capri?

Asked by king_re2003 Feb 15, 2011 at 07:08 PM about the 1980 Mercury Capri

Question type: Car Customization

I have a Capri (1980, black ext, blue int, 4sp manual, don't know the engine off hand but think it's a 4cyl.)  Bought it from my brother-in-law; long story, but it's in decent shape with low original miles and may be worth updating for my son to drive.  Just wondering if anyone had any pointers.  Would like to give it new interior, dash, seats, install A/C, better/newer/safer brake system, etc.  Don't care about power so much as long as it's safe for him as a first car.  It pretty-much would need a good 'overhaul', but don't know how to or how much to get it done.

Since it shares bloodlines with the mustang, it'd be nice to drop in a real powerhouse engine- but I'll let him do that with his money.

Thoughts and suggestions would be greatly appreciated.

Thanks!

2 Answers

I would advise against putting in a larger more powerful engine. The car is designed to be as it came from the factory; I speak from experience. My son persuaded me to fund swapping a 4 cyl. engine in his '82 Pontiac firebird for a large V-8. The results were a horror. Speedometer didn't read right, suspension was way overstressed. exhaust system was a mess...........don't do unless you have very deep pockets!

25

1980 Capri could have 1 of 2 4cyl engines (1 being turbo charged), it could also have a straight 6 in it, it's also possible that it has the 255 V8 in it (which is a SLUG!). Being low original miles, I would recover the seats / new carpet / new dash pad (not just a "cover) - you can find these pretty reasonable from Latemodel Restoration to name just one company. I wouldn't get into changing the color as it can get VERY expensive! As for updating the brakes, one of the easiest / cheapest ways to go is to get the spindles from an 87 - 93 Mustang (bolt on swap) & then get the new rotors /calipers & pads to go with that set up (they are over an inch larger, yet don't require larger wheels & MUCH better than the 10" rotors these cars came with new). As for the motor; if it's either 4cyl you could rebuild or swap, with the straight 6 you're kinda stuck rebuilding. Doing a swap (4cyl or V8) would require swaping the front K member ( they are unique to the L6), as for the 255, I would suggest swapping - these were just about useless when new & there's little to no aftermarket parts available for them. As your other replier stated, swapping can get costly, but you can determine how far you want to go in advance. Conceivably you could put a V8 into a car with the 4cyl suspension & then as things get worn, do the upgrades to the V8 parts (alot of the time there's no difference), I would do the brake upgrade to the later model spindes/rotors no matter what! In reguards to what your other replier said reguarding his son's firebird swap from 4cyl to V8, this would be the same as L6 to either other motor in your case. The 4cyl F body GM cars were only made for a couple of years as they were more or less "bastard" children & VERY costly to produce. Same thing can be said about the L6 Capri's & Mustang's, which is why they too were only built that way for a couple of years.

Your Answer:

CarGurus Experts

  • #1
    jogger
    Reputation
    600
  • #2
    tuff4x4
    Reputation
    190
  • #3
    Kevin Steinmetz
    Reputation
    170
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.