Ford Galaxie Questions Car Customization

1966 Galaxie Custom 500

Are there any sort of kits out there that would allow me to lay the front seat backwards towards the back seat to kind of make a bed/couch in the car?

1967 Ford Galaxie 500 Convertible

So I have bought a Galaxie and it didn’t come with seatbelts. Did the ‘67 Galaxie have seat belts back in the day or not? Just wondering if I should put the seatbelts on my list

Galaxie Interiors

I have a 1972 galaxie. I am having issues finding some things for the interior. I know the 69-72 models were the same platform, but are the dashboards and seats interchangeable?

1970 Ford Galaxie 4 Door

I have a 1970 ford galaxie 4 door. I was wondering what would be the best way to customize it. Hot rod or lowrider?

Convert To Disc Brakes On 1967 Ford Galaxy

Put new disc brakes on all 4 wheels can't get enough pressure to rear brakes. Is there an adjustment on master cylinder ?

Do Anybody Know Where I Can Find Parts To Restore A 1969 Ford Galaxie 500 A...

Need hood, trunk, back lower part of seat, and floor pans if possible.

I Have A 68 Galaxie 500 And Want To Know If A Ford Torino Gt Dash Will Fit...

How Do I Remove The Front Bench Seat In My 1967 Galaxie

I own a 1967 ford galaxy ltd I'm very mechanically inclined I've done all the repairs on this car myself but I cannot figure out how to remove the front bench seat the nuts on the tracks of the seat s...

1967-68 Galaxy Wagon

will the rear clamshell seat from a 1968 galaxy wagon fit in a 1967 wagon. thanks mark

Could I Put A 400 Crankshaft Into A 390 (Both Ford Motors.)

I have heard through the grapevine, to make a 390 a Stroker, you can put a 400 crankshaft into a 390. Now The question is, the 400 is a smallblock and the 390 is a big block. Now I wanna put a strok...

New Cam And Flat Tappet Lifters Onmy 64 Galaxie 500. 390 Fe. Runs.not Time...

My gauge was put in by someone else. Vaccuum line from top nipple of oil filter. Worked good before and gauge read 40+upon 1st startup. Light scared me so I shut it down.

Is This Car Refurbishable?

This car is in the woods behind my house. The shell is in ok condition, but there are like no parts on the car. Is it possible to refurbish it. It is a 1959- 1963 ford galaxie i believe. thanks.

Will The Bucket Seats From A 67 Thunderbird Fit In A 66 Galaxie 500 Two Doo...

'65 Galaxie Restore Or Hot Rod

Have 65 Galaxie and been working on it with the old man. It was given to me to do anything I want to with it. I am trying to decide if I should restore it, or go down the hot rod path. It does run and...

Will A Bench Seat From 65 Galaxie Fit My 63 Galaxie

Wiil Atrunk Pan From A 1968 Ford Galaxie Fit A1972 Ltd

looking for a trunk pan1972 ltd also back seat fllor pans

What Modern Frame Would A 65 Galaxie 500 Convertible Fit In?

Hood

Will the hood of a 66 Galaxie 4 door fit a 2 door convertible? And is there any other years hoods that will fit?

64 Galaxie 500XL Frame Swap W 96 Lincoln Town Car

Anyone frame swapped a 64 galaxie XL w a 96 Lincoln Town Car? I'm about to begin. Wheel base is a near match within an inch or so... And the low profile air ride geometries will help. Having owned...

What Motor Mounts Should I Use To Install A Foxbody 5.0 Into A Formerly Big...