Ford Fairlane Questions Car Customization

Filter by type:

LuckyKe7in asked a 1964 Ford Fairlane Sedan Car Customization question 11 months ago

What Rotor / Disk Break Setups Are Compatible To Convert A 64 Ford Fairlane...

I found info that the 65 mustang is, but I'm wondering if there are other models (or just general specs I can look up) to know what others will work? I'm looking to go to a parts yard and grab all the...

17 views with 1 answer (last answer 11 months ago)

Guru99T2P2 asked a 1965 Ford Fairlane Sedan Car Customization question 3 years ago

Where Do I Buy The Complete Engine Mount Set For My 1965 Fairlane?

I removed the straight 6 and want to install a 302. Thanks.

17 views with 1 answer (last answer 3 years ago)

Guru99T2P2 asked a 1965 Ford Fairlane Sedan Car Customization question 3 years ago

I Want To Install A 302 Into My 1965 Fairlane. What Motor Mounts Are Needed...

I removed the original 200 CID straight six from my 1965 Fairlane. I want to install a 302. What motor mounts are needed? Thanks

100 views with 3 answers (last answer 2 years ago)

lreg1976 asked a 1963 Ford Fairlane Car Customization question 4 years ago

Where Can I Find A Radio For A 1963 Ford Fairlane 500?

Help!!!! I am trying to find an original radio for a surprise gift - it's a 1963 Ford Fairlane 500 any help would be much appreciated

46 views with 4 answers (last answer 4 years ago)

GuruNVBG5 asked a 1958 Ford Fairlane Car Customization question 4 years ago

312 To 351 Must I Modify Firewall

Modify firewall

29 views with 2 answers (last answer 4 years ago)

GuruHLCDR asked a 1957 Ford Fairlane Sedan Car Customization question 4 years ago

Motor Mounts For Engine Swap

Where can I find motor mount conversion kit for my 57 Fairlane 500? Want to install a 302.

237 views with 4 answers (last answer 4 years ago)

ANGRYZOMBEES asked a 1969 Ford Fairlane Sedan Car Customization question 5 years ago

1969 Ford Fairlane

What vehicles have front clips similar enough to fit on a 1969 ford fairlane 4 door?

22 views with 2 answers (last answer 5 years ago)

fairline56 asked a 1956 Ford Fairlane Sedan Car Customization question 5 years ago

What Are The Dimensions Of The Largest Wheel Tire Combination To Fit In A 1...

96 views with 1 answer (last answer 5 years ago)

Ken asked a 1962 Ford Fairlane Sedan Car Customization question 5 years ago

1962 Fairlane Sheet Metal?

I have a 62 fairlane 500 and i want to know if the 64 front end will fit. The parts are more available for the 64 and it wanted fiberglass fenders and hood. Thanks.

403 views with 3 answers (last answer 5 years ago)

Guru9Z78D asked a 1956 Ford Fairlane Car Customization question 6 years ago

1956 Ford Fairlane When First Start It Only Starts In Drive Next Time I T W...

34 views with 1 answer (last answer 6 years ago)

mwilson709 asked a 1963 Ford Fairlane Car Customization question 7 years ago

Upgrading A 221 Motor In 63 Ford Fairlane To A 289 Or 302

What's required to change the 221 motor in my 63 Fairlane 500 to either a 289 or 302 and approximately how much would it cost.

1,000 views with 3 answers (last answer 7 years ago)

Mitchel asked a 1963 Ford Fairlane Car Customization question 7 years ago

I Want To Put A 302 In A 1963 Fairlane Need Motor Mounts

new 302 in 1963 fairlane 500

536 views with 2 answers (last answer 4 years ago)

joeypane asked a 1967 Ford Fairlane Car Customization question 10 years ago

Will The Front And Rear Bench Seats In A 1965 Galaxie Work In A 1967 Fairla...

547 views with 4 answers (last answer 6 years ago)

1957larry asked a 1957 Ford Fairlane Car Customization question 9 years ago

57 Ford Fairlane 500-front Ends

Is there another front end that would replace my stock one that has disk brakes on it? mine is shot..

561 views with 2 answers (last answer 9 years ago)

Nida asked a 1963 Ford Fairlane Car Customization question 9 years ago

I Am Looking For Other Models Of Buckets Seats That Would Fit In My 1963 Fo...

Anyone know which other models will fit in my 1963 Ford Fairlane 2-door, need the bucket seats and console.

478 views with 1 answer (last answer 9 years ago)

63Fairlane500 asked a 1963 Ford Fairlane Car Customization question 9 years ago

Will A 302 V8 Bolt Up To The Transmission In My 1963 Fairlane If It Has A 2...

767 views with 2 answers (last answer 3 years ago)

brutuss asked a 1966 Ford Fairlane Car Customization question 9 years ago

What Modern Frame Would I Be Able To Use For A 1966 Ford Fairlane 500xl

250 views with 1 answer (last answer 9 years ago)

Thatguywiththe63 asked a 1963 Ford Fairlane Car Customization question 6 years ago

Engine Swap On A Fairlane

So I'm swaping a 73 302 into my 63 fair lane (4 speed t10) and I've came to realize I forgot my 260 bellhousing won't fit the 302 (obviously) so my question is do I need a bellhousing that's speci...

343 views with 1 answer (last answer 6 years ago)

samjack98 asked a 1999 Ford Fairlane Sedan Car Customization question 4 years ago

Ford Fairlane AU

what do i have to do to put Manuel 5 speed in ford Fairlane AU

14 views with 1 answer (last answer 4 years ago)

slexx asked a 2004 Ford Fairlane Sedan Car Customization question 10 months ago

Do You Have To Reapply Primier If You Drive Your Car For One Day ?

Unfortunately I have sprayed my car bumper with primier and I need to drive my car tomorrow because I forgot about a important doctor's appointment so basically once I have finished driving my car ...

8 views with 1 answer (last answer 10 months ago)

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.