Slave cylinder on a 1995 Ford Ranger 4 wheel drive if the plastic piece is missing from hose how do you remove

Slave cylinder on a 1995 Ford Ranger 4 wheel drive if the plastic piece is missing from hose how do you remove 1 Answer

how do you disengage the 4 wheel drive on a 2001 ford ranger? 3 Answers

the front wheel drive will not disengage, is therte anything I can do to get back to 2 wheel drive . I put it in neutal but it will not change drives.

I need to know how to remove the hose and housing to replace my thermostat on my 1997 ford ranger 4 cylinder 3 Answers

I can get the hose of but not the metal tube that the hose connects to

How do I remove the alternator bracket on a 96 ford ranger 2.3? 4 Answers

I'm changing the water inlet connector tee that slips into the water pump and attaches to the lower rad hose and a heater hose.the biggest problem is the one end that got into the pump is behind the...

is there a test that you can do to see if the water sensor is bad that goes to the computer on a 93 ford ranger 3.0 1 Answer

i got a bad low speed miss and waqs wondering is i could test the water temp sensor.