How much oil does the 2020 RDX hol when changing. Manual doesnt say?
2 Answers
For years, I noticed that any car I owned was never full of oil after I changed the oil with the owner's manual required oil fill. To eliminate this problem, what I did, was buy a large plastic container, like a big juice container, and when I drain out the oil, I pour all the old oil into that container. I also empty the oil filter into this container. Then I take a permanent marker and make a line where the oil level is on that container. After putting the old oil in a recycle container and wiping out the "juice container" with paper towels, I now pour the new oil up to the fill line I marked. Then I use a funnel and put it in the engine. The oil level is always right back up to the full line on the dipstick, and I do not have to check the oil for days after and add a little at a time to get it all the way back to full. You only need to put the old oil in the container one time to get the proper mark for the oil needed. I have one mark for each car I own. Sure takes the guess work out of how much oil is needed. Each time I buy another car, I repeat the procedure once to get the proper fill on each oil change.
