i have a 3000gt SL 1993 model and the only major issue is theres only one fuse that blows/burns out when im either sitting idle at a red light too long or if i force my car to do a quick sharp turn

i have a 3000gt SL 1993 model and the only major issue is theres only one fuse that blows/burns out when im either sitting idle at a red light too long or if i force my car to do a quick sharp turn 3 Answers

I own a 92 3000gt SL and it likes to only start when it wants to. When it does start it drives completley normal but sometimes it will just sit there and turn over as she usually would. then 30 minutes to and hour and a half or so i try again and she starts up 90% of the time. Very sporatic and i was curious if anyone new what this could be? ignition module, crank angle sensor or cam angle sensor, or ignition coils or plugs and wires are my suspecrts so far? please help thank you 3 Answers

Dohc 3.0 92 3000gt SL

having problems here I have a 95 3000gt car was working fine on Friday come sunday it wont start. when I turn the ignition on I hear no relays turning on and off and fuel pump dose not prime. all the lights come on and off on the dash. and the fuel pump dose come on when cranking. I do have spark and fuel pressure. would this be a bad main relay or an ecu? I need help 26 Answers

having problems here I have a 95 3000gt car was working fine on Friday come sunday it wont start. when I turn the ignition on I hear no relays turning on and off and fuel pump dose not prime. all the ...

I am having a problem with my 1998 3000gt. WhenI use the left blinker it makes a buzzing noise and theblinker does not always work. It only happens when I use the left blinker? Is it a short?, or is ther something wrong with the switch/relay. It seems to be draining the battery. Help, please.Mark 2 Answers

Mitsubishi 3000gt turn signal problem.

If my 92 mitsubishi 3000gt sl just died going down the road and now I can't get fire to my coil packs would it be my ecu or my icm? There's a huge difference in price on them so trying to figure out 7 Answers

Iv already changed the crankshaft position sensor and still nothing