No start , replaced feul pump and filter.

Asked by Mike Sep 17, 2018 at 10:56 PM about the 1989 Dodge Ramcharger 100 4WD

Question type: Maintenance & Repair

Got a 89 ramcharger cheep.
Was running a week ago. Put a
new feul filter and fuel pump
and no start now.  After some
cusing and what not.  I found a
bad relay . Now can't get relay
anywhere and there is now fuel
getting to tbi injectors. And no
spark.   Thing of tring jumper
and running hot leads to make it
run.  It turns over but won't run.

9,520

Mike answered 5 years ago

Are you talking about the asd relay? They are as common as dirt as are most other relays in that vehicle, no spark? Is there current at the pos terminal on the ign. Coil? If yes check the pick up coil in the distributor. If no check the bulkhead connectors to make sure they're tight and clean. note the asd auto shut down relay controls current for fuel and ignition systems. I hope this helps you

1 people found this helpful.

Mark helpful

GuruLLXPF answered 5 years ago

I have an 89 ramcharger it will not startI got a control module but can't find the right spot for it I am a beginner please help me

Mark helpful