I am working on a 1975 chevy 10 van,I have replaced the brake booster, master cylinder both rear wheel cylinders and bled all the brakes.
Asked by starhunter54 Oct 15, 2017 at 09:23 AM about the 1975 Chevrolet C/K 10 Custom Deluxe RWD
Question type: Maintenance & Repair
Now when driving excessive force is needed to stop the van. Any Ideas where to look next
6 Answers
Look up "diagnosing hard brakes." Could be lack of vacuum, check valve, booster. FYI the master cylinder should have been bench bled, if not you likely still have air in the system.
enginecreator answered 6 years ago
If hard to push pedal then look at this page, url below copy & paste to new browser window.
enginecreator answered 6 years ago
http://techtalk.mpbrakes.com/how-to-series/how-to-diagnosing-a-hard-brake-pedal
starhunter54 answered 6 years ago
Hello everyone, just to fill you in this van had an extra brake line installed for a trailer towing package. That was the main problem with the braking system. Ounce this line was removed and the brakes re-bled just to be sure everything works fine. Thank you very much for your advice and what to look for. I raise a glass to all of you. Cheers !!!!!
