i have a 1990 Chevy silverado 1500 and when i put a new ect sensor in it it will not start but when i put the old one back in it will satrt?

i have a 1990 Chevy silverado 1500 and when i put a new ect sensor in it it will not start but when i put the old one back in it will satrt? 1 Answer

I have a 1998 Chevy Silverado 1500 and I just put a brand new fuel pump in it and a New fuel filter. When I try to,stat it, it will not stat unless I poor gas in the tb and it will idle but when u giv 4 Answers

It gas it want to spit and spudder and,when it,get hot and u,try to put it,in drive it will just die and want start back up please help me to figure it out

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

i have a 1991 Chevy, just recently put a 383 stroker in it. i have holley throttle on it. the chip has not be put in it as of yet. my problem is after driving it on a 2 hour trip, one hour in to it, 2 Answers

i have a 1991 Chevy, just recently put a 383 stroker in it. i have holley throttle on it. the chip has not be put in it as of yet. my problem is after driving it on a 2 hour trip, one hour in to the...

my chevy 1998 k1500 grinds while in 4wheel drive when i put a strain on it 1 Answer

when my truck locks in to fwd its fine untill i put a minimal strain on it then i hear a grinding noise and it seems like it comes out 4wd.