96 chevy 1500 z71 won't start
I got a 96 chevy we had to change the wirring
harness and computer on and now it won't fire we
got all the grounds right changed crank sensor
distributor the cap and the rotor button also and
changed the coil 3 different times we are getting fire
to the coil and to the distributor but it's not putting
not out of the distributor or the coil
Could be the ignition control module. If you take it out and take it to an auto parts store, they can test to see if it is good.
We have put I put like 2 more different ones off of other trucks that only had trans problems but it still won't start also my buddy that's working on it said the could get it to shoot a little fire out of the coil when they was testin on the fuse box with a test light but couldn't get it to continue to fire
The crankshaft sensor is the next most common thing to look at.
Done put one of them in to
If the coil and the ignition control module are good, and you are getting power to the coil, then something would not be breaking the circuit, which leaves the camshaft sensor. And also try to turn the rotor checking to see if the distributor gear is still locked in. The rotor should not turn by hand.
Looking for a Used C/K 1500 in your area?
CarGurus has 11 nationwide C/K 1500 listings starting at $5,999.
Search Chevrolet C/K 1500 Questions
Chevrolet C/K 1500 Experts