HueyFireCrew answered 6 years ago
If you have a volt/ ohm meter, you can set it io resistance (Ohms) with the tone. Attach a probe to each blade on the plug in the lower grill area in the bumper. If you have tone it's good. No tome indicated a short (or open) in the wire of element. I know on mine when I plug it in I can hear the "arc" in the plug that comes from plugging in an "always on" load making contact with a power source
2003 Ford F-350 Super Duty Lariat Crew Cab SB DRW 4WD
-
Maintenance & Repair
Where is the exact spot on starter to use screwdriver manually to srart the vehichle? 2003 ford deisel 4x4 superduty extended cab?
2003 Ford F-350 Super Duty XLT Crew Cab LB DRW
-
Maintenance & Repair
My F-350 dually lost power when accelerating while pulling my 1400# fifth wheel trailer. Heard a loud noise and speed slowed to a crawl with jerking motion at first. Ford dealer tech said they thoug...
2011 Ford F-350 Super Duty King Ranch Crew Cab LB DRW 4WD
-
Maintenance & Repair
were is the block heater cord located.
2022 Ford F-350 Super Duty Lariat Crew Cab LB 4WD
-
Maintenance & Repair
Hose is soft, flexible, and cracking( dry rotting) and the end that goes into the intake manifold is lose and comes out easily. The o ring on the same end is considerably warn. trying to get the part ...
2003 Ford F-350 Super Duty Lariat Crew Cab LB 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.