hello people.pls can a p0340,p0705,p0706 codes on diagnosis make car to jerk pls I need an urgent reply.thanks

whts the engine size

v6

is it a 2.4 or a 2.5 it critical should be on the top of your engine

what I found on the engine is v6 dohc 24 v.thanks

that's it ill find em both for you they shouldn't be that different

Transmission Range Sensor A Circuit (Park/Reverse/Neutral/Drive/Low Input p0705 Transmission Range Sensor A Circuit Range/Performance p0706 Camshaft Position Sensor A Circuit (Bank 1 Or Single Sensor) p0340

that is for the 2.4

so what d0 you suggest about the jerking of my car and d code .because I have replaced the engine and gear mount.it is still jerking at 60mph .I used diagnostic machine and I was given the codes.pls help me.thanks

trans range sensor would do that at that speed have you changed the fluid recently if you haven't one of the auto trans valves try putting some lucas trans fix in it can you mark my defenitions most helpful

those defenitions are the same for the 2.4 and 2.5

do I need to buy a complete gear box.I have changed the transmission oil about last month.I don't understand what you mean by auto trans valve and Lucas trans.thanks

pls I need your professional advise urgently. thanks

do I need to add Lucas transmission fix alongside the transmission oil to the gear and where can u get the Lucas transmission fix in Nigeria. thanks

is it a manual or automatic

automatic. thanks

are u using the right Atf( automatic transmission fluid) +3,4,5

I use abro automatic transmission oil type A

thanks everyone. I have changed the valve body in my gear and ever since then it has stop jerking.the only problem is my check engine light that is always on

go to auto zone and ask if they will erase the engine codes for the light and if they ask y tell them you fixed the problem