Just recently repalaced the clutch in my 2003 hyundai tiburon also the master and slave cylinder since then it will not go into first or second gear. Could you please help me out on this situation.
My car will not go into first or second gear
Did you bleed the system properly? Does reverse work? Also why did you initially replace the clutch?
Yes Sir it has been bled and the clutch was replaced because the throw out bearing was bad in it, And yes reverse does work but when you put the car in reverse you have to hold the shifter into place in order to back up.
My car will not go into first or second gear
2003 Hyundai Tiburon FWD
-
Maintenance & Repair
I have a Stage 2 6 puck clutch on my car that is about 4 years old now that started to chatter a while back even with the clutch pedal depressed. Before hand it only chattered while in neutral without...
2006 Hyundai Tiburon GT FWD
-
Maintenance & Repair
...So I take it home and then a few days later same thing happens, it cranks and cranks but won't fire. So I let it sit for a day or two, but nothing. I get it towed to Hyundai dealer, won't star...
2001 Hyundai Tiburon FWD
-
Maintenance & Repair
I need to replace all 4 struts in my 2003 Hyundai Tiburon GT and everywhere it's asking if I have the sport suspension or not, and I have no idea where I can find this information. I bought the ca...
2003 Hyundai Tiburon GT FWD
-
Maintenance & Repair
I have a 2008 tiburon gs, & every time I use the brakes, I have sorta a whistle noise, or kinda sounds like when you blow up a ballon & then pull the sides to make that whistle noise while letting ...
2008 Hyundai Tiburon GS FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.