1994 gmc k1500 starts and idles fine put in gear and stalls(like i let out clutch) i have a 4l60e trans replaced tcc in trans no change

Asked by wesley08 Oct 19, 2012 at 08:28 PM about the 1994 GMC Suburban K1500 4WD

Question type: Maintenance & Repair

9 Answers

16,735

sounds like your torque convertor is locked up see if you can get it moving them put in drive to make sure thats it then it wont stall until u stop again

3 people found this helpful.
69,015

He replaced the tcc thinking it was the problem and it didn't fix it. What is your fuel pressure?

1 people found this helpful.

thanks robert and john here is some more info, got 94 gmc i have 310,000 miles on original motor and trans and fuel pump only thing changed out was a new radiator at 145,000 miles. fuel pressure is good. took out trans and checked tc turns one way fine like it should re checked tcc to double check still got problem. cant road test cause of the problem i have, how ever i put 4x4 in netural and could shift throu gears fine.motor 5.7 tbi any other tries. cant find any other problem the same or even close to my problem

69,015

Once the torque converter is unbolted from the flexplate it should spin freely in both directions shouldn't it? Can you get it rolling and into gear? So many questions I'm trying to contain them lol. For now anyway.

1 people found this helpful.

I have a 1994 suburban 4 4 and wht gear do u put it in when drivn around city and how do you change the gears

16,735

If you don't know how to change the gears do you think you should even be driving?

Well if you don't know how to answer her question, then should you be answering? Not very nice. I'm pretty sure that she is asking about how to shift her manual 4wd GEARS from 2lo to 2hi etc. Which is a good question. Put the e-brake on (on a 94 suburban you will want to push down on the left brake pedal) and then shift the gear-shifter that touches your steering wheel column into neutral. Then shift away on the gear-shifter that is coming straight up from the center of your two seats (little black knob) and shift fast BC slow shifts can slip. Shift to desired gear (2Hi, etc.) and then take it out of neutral. Release the e-brake with the lever above the e-brake pedal to your left on a 94 suburban 1500 and enjoy. Hope this helped. Saw your question on a few threads best of luck.

I have same problem ( like I'm letting out on clutch ). Truck runs fine but wants to shake when I hit 3rd gear on highway untill I speed up or let off. Are these related?

Your Answer:

Suburban

Looking for a Used Suburban in your area?

CarGurus has 1 nationwide Suburban listings and the tools to find you a great deal.

Postal Code:

CarGurus Experts

  • #1
    ShadetreeMech
    Reputation
    1,090
  • #2
    Larry Thibert
    Reputation
    970
  • #3
    DanTheMan5160
    Reputation
    660
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Chevrolet Suburban
13 Great Deals out of 509 listings starting at $11,950
Used GMC Yukon
15 Great Deals out of 936 listings starting at $5,998
Used Chevrolet Tahoe
18 Great Deals out of 859 listings starting at $9,980
Used Ford F-150
343 Great Deals out of 12,723 listings starting at $599
Used Ford Explorer
57 Great Deals out of 2,220 listings starting at $7,990
Used Toyota Land Cruiser
5 listings starting at $26,895
Used GMC Sierra 1500
188 Great Deals out of 8,956 listings starting at $1,000

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.