99 dodge dakota security system

30

Asked by Michael Feb 29, 2020 at 03:13 PM about the 1999 Dodge Dakota SLT Club Cab RWD

Question type: Maintenance & Repair

How do I program new keys to a 99 Dodge Dakota
after replacing ignition switch an ignition cylinder
do from truck being broke into nothing was left of
the old cylinder so now it's not doing nothing
starting wise nothing. So how do I program the
new keys I have the old key still but they're useless
to me cuz they won't turn the cylinder anymore
because those were for the old cylinder ignition
keys can anyone help me please this has been a
headache for me for about 3 weeks now and it's
my son's car

1 Answer

110

POST BY DavidH25 6 years ago Best Answer Enter your vehicle with your key. Consider using a timer or reliable watch for the following steps. If you use a timer, program it for 10 minutes, 30 seconds. Insert the Dodge Dakota key and turn it to the "On" position. Start your timer. Turn the key back to the "Off" position when the time elapses. This must be done within 45 seconds of the timer going off. If you are using a timer, reprogram it for an additional 10 minutes and 30 seconds. Start the timer again and turn the key to the "On" position. When the countdown is finished, turn the key to the "Off" position within 45 seconds of the time elapsing. Program any additional keys by putting a programmed key in the ignition and turning it to the "On" position for five seconds. Return it to the "Off" position and remove it from the ignition. Place the additional blank key in the ignition and turn it to the "On" positions for five seconds, and then to the "Off" position. Turn it once more to the "On" position and it will be programmed to start your car. If Your Key Won't Program Contact a reliable automotive locksmith. This is best done through a professional organization such as the Associated Locksmiths of America. Bring the key to the automotive locksmith. Remember that there is frequently a substantial discount for every additional key you would like to have programmed after the initial key. This is typically not the case with the dealership. Test your key in your ignition. If it does not work, then the key needs to be reprogrammed. An automotive locksmith should do this for free until you have the right encoding for your key.

Your Answer:

CarGurus Experts

  • #1
    Samantha Brown
    Reputation
    3,110
  • #2
    98DAK
    Reputation
    3,060
  • #3
    havoc_33
    Reputation
    2,110
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Dodge RAM 1500
86 listings starting at $7,995
Used Toyota Tacoma
43 Great Deals out of 682 listings starting at $9,975
Used Ford Ranger
19 Great Deals out of 533 listings starting at $6,500
Used Chevrolet Silverado 1500
213 Great Deals out of 9,034 listings starting at $2,900
Used Ford F-150
343 Great Deals out of 12,723 listings starting at $599
Used Dodge Durango
70 Great Deals out of 1,993 listings starting at $7,999
Used Nissan Frontier
13 Great Deals out of 572 listings starting at $9,850
Used Toyota Tundra
33 Great Deals out of 988 listings starting at $9,240
Used Chevrolet S-10
3 listings

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.