I have replaced the cam sensor twice and no start condition exhists...have cleared codes with my scanner and still shows code P0340 with a crank but no start condition....Am stumped with 0340 code.,

Asked by Ken Jul 31, 2015 at 03:18 PM about the 2004 Dodge Neon SXT Sedan FWD

Question type: Maintenance & Repair

replaced cam sensor 2X...WTH

157,415

Bob answered 8 years ago

http://www.srtforums.com/forums/f169/code-p0340-no-start-602176/

3 people found this helpful.

Mark helpful

157,415

Bob answered 8 years ago

Is the timing belt broke? Did you purchase the sensor from Dodge or is it aftermarket? Is the ground at the ECU good?

Mark helpful

Ken answered 8 years ago

aftermarket CMS....really makes the difference..??

2 people found this helpful.

Mark helpful

Ken answered 8 years ago

in the process of checking ground...thanks

1 people found this helpful.

Mark helpful

157,415

Bob answered 8 years ago

Just provided a link that may be of help. I don't have much experience with your brand of vehicle. Always check the easy stuff first before replacing parts. Sometimes manufacturer parts are much better than aftermarket parts, but they do cost more. Best of luck with it.

2 people found this helpful.

Mark helpful

wizkid78 answered 8 years ago

Did the car run before you replace it,if it did and you bought a after market one then go to a oem

Mark helpful

Your Answer:

I have replaced the cam sensor twice and no start condition exhists...have cleared codes with my scanner and still shows code P0340 with a crank but no start condition....Am stumped with 0340 code., 6 Answers

replaced cam sensor 2X...WTH

2004 Dodge Neon SXT Sedan FWD

-

Maintenance & Repair
I am getting a P0340 Cam Positioning Sensor error 1 Answer

I am getting a P0340 Cam Positioning Sensor error but the car still runs well and is not missing. what else could it be? I just replace the timing belt

2002 Dodge Neon Sedan FWD

-

Maintenance & Repair
Can a cam sensor malfunction indicated by the code p0340 cause an engine knock? 6 Answers

Because of the engine knock I replaced the engine with a used one with 51,000 miles on it. Then I pick up my car and before I get home the same code comes up on the computer. Did I just get scammed? I...

2005 Dodge Neon SXT Sedan FWD

-

Maintenance & Repair
I have a 2004 dodge neon. the check engine light came on, the car started running rough and eratic. then the car shuts down and will not start back up. the vehicle will not even turn the starter over. no clicking or nothing. the vehicle is at home and I have no access to a trouble code scanner. could you please give me some pointers? 2 Answers

2004 dodge neon. the vehicle will not turn over at all after dying out , after the check engine light came on.

2004 Dodge Neon SE Sedan FWD

-

Maintenance & Repair
We just purchased a used 1995 Dodge Neon and we are having problems with it. The problem is the car will drive for approximately 15 to 20 minutes and the engine begins to jump and miss. When this occurs, we stop the car and let it cool for 10 to 15 minutes and then it will go for about 8 miles (10 to 15 minutes) and will start missing and jumping again. We took it to advance auto and they used a computer diagnostic machine and told us the ignition coil was malfunctioning, so we replaced it but it is still doing the same thing (missing and jumping). My wife says she smells a gas/fuel smell when it starts. Also, thought I had water in the gas tank, so I used dry gas but that didn't help either. Do the 1995 Neon's have a particular problem that sounds like mine? Thank you for any help you can give. 5 Answers

We are also having problems with the dashboard instrument lights and panel are not working. They also work on and off.

1995 Dodge Neon Sport Coupe FWD

-

Maintenance & Repair

Looking for a Used Neon in your area?

CarGurus has 1 nationwide Neon listings starting at $6,900.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have replaced the cam sensor twice and no start condition exhists...have cleared codes with my scanner and still shows code P0340 with a crank but no start condition....Am stumped with 0340 code.,

6 Answers

Your Answer:

Looking for a Used Neon in your area?

Shortcuts

Search Dodge Neon Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I have replaced the cam sensor twice and no start condition exhists...have cleared codes with my scanner and still shows code P0340 with a crank but no start condition....Am stumped with 0340 code.,

6 Answers

Your Answer:

Related Questions