how do I reset the tire low pressure light Toyota Highlander 2012
Asked by Highlander24 Oct 20, 2014 at 06:57 PM about the 2012 Toyota Highlander SE V6
Question type: Maintenance & Repair
Tire changed. Low pressure light is still on.
6 Answers
mummieothree answered 9 years ago
Sometimes it's as simple as pressing the odometer button on your dash.. if try that.
mummieothree answered 9 years ago
So apparently you have a picture of a tire near you ignition. Press and hold the "set" button for like 3 seconds and release. The indicator light will flash 3x. Done :)
Where is the set button, I don't find one. Help
Earllawman answered 7 years ago
2013 Highlander. Button is on right hand side under dash. I could not get light to go off. with reset switch I checked the spare tire and it was at 22.5 PSI. Pumped it up to 30 PSI and light went out. So you make sure check all tires including your spare.
2011 Toyota Highlander. Had no luck find the reset switch, HOWEVER, the warning indicator also includes the SPARE tire (there is a BT sensor in the valve stem which operators on a tiny battery which signals to the car as well). We had filled the 4 vehicle tires properly, and was still showing the tire pressure warning. Researched it - checked and filled the spare, the warning indicator turned off.
BillieJoeRemarkable answered 3 years ago
On my 2012 it was the spare that was low. There is NO reset button on the 2012. It's a difficult fill under the car. Thanks for the info.
