How can I bypass the skip shift on a 2012 Mustang GT with a manual transmission?
2 Answers
Leaving the connector unplugged will throw a code, specifically DTC P0803. Installing a 50watt 6ohm resistor across the unplugged connector will provide the same electrical load as the skip shift solenoid and will fake out the computer (no codes) The resistor is the same used to place a parallel load on LED lights (see picture). They are less than 6 dollars on eBay. I soldered a few thin solid wires to the resistor ends, stuck the wires into the connector and shrink wrapped the whole thing to the end of the wiring harness. The light still illuminates but the lockout no longer interrupts shifts. From http://www.stangnet.com/mustang-forums/threads/how-to-disable-skip-shift.828582/
unclebuck48 answered 7 years ago
Unplugging the connector will not throw a code or cause any problems. Did it on my 2012 GT