engine and battery lights on
Hi everyone, please help , my engine and battery lights is
on ( p0038,p0032,p0622) i changed one oxygen sensor,
and still have a lights on dashboard,battery is new and
alternator is good , but when i started the car after couple
minutes, car started loosing the power, and turned off by
himself, and i have to jump the are all the time , i am a girl
You best to take it to a shop for repair.
yes , we know is the best take it to a shop , but first i try to find answer here ,
P0622 CHRYSLER - Generator Field Not Switching...Possible causes: Battery charge, Faulty Generator, Generator harness is open or shorted, Generator circuit poor electrical connection, Engine Control Module (ECM) controlled generator, Faulty ECM...If the battery is OK then the alternator is more than likely the problem...Possible symptoms: Engine Light ON (or Service Engine Soon Warning Light). P0622 Description: The Engine Control Module (ECM) uses the generator turn on signal circuit to control the generator. A high side driver within the ECM allows the ECM to turn the generator ON and OFF. When Generator operation is desired, the ECM sends a 5 volt signal to the voltage regulator via the generator turn on signal circuit. This causes the voltage regulator to begin controlling the generator field circuit. Once the Generator is enabled by the ECM, the voltage regulator controls generator output independently of the ECM. Under certain operating conditions, the ECM can turn Off the generator by turning Off the 5 volt signal on the generator turn on signal circuit....Another possible fix..quote..." I started to move the wiring on the connector that plugged into the alternator and I could see a tiny spark at the wiring. I went to the junk yard got a plug cut the old plug off and that solved the problem."
Thank you so much, we will try tomorrow
Looking for a Used Sebring in your area?
CarGurus has 259 nationwide Sebring listings starting at $2,500.
Search Chrysler Sebring Questions
Chrysler Sebring Experts