Asked by Nina Sep 07, 2017 at 12:52 PM about the 2011 Nissan Altima 2.5 S
Question type: Maintenance & Repair
SES light came on so I went to AutoZone, hooked up
machine to tell you the code, P0101, which is replace
Mass Air Flow Sensor, replaced that had air filter cleaned
because I have a K&N filter. SES Light won't go off, Even
reset the battery.
I have had problems with K&N air filters. They tend to get over-oiled and the oil winds up on the MAF sensor, causing it to malfunction. 1) Try a stock paper-element air filter. 2) Thouroughly clean MAF element. 3) manually reset the SES light. Good luck!
there is an ecm reprogram that nissan just put out about a year ago for this issue
SES light came on so I went to AutoZone, hooked up machine to tell you the code, P0101, which is replace Mass Air Flow Sensor, replaced that had air filter cleaned because I have a K&N filter. SES ...
2011 Nissan Altima 2.5 S
-
Maintenance & Repair
Service Engine Soon light on and car bucking
2012 Nissan Altima
-
Maintenance & Repair
We have a Nissan Altima 2012. The SES light keeps coming on, we take it to our local garage who have always treated us fairly and done right by us. They've tried everything to fix this. They repl...
2012 Nissan Altima 2.5 SL
-
Maintenance & Repair
How do I reset the ses light on a 99 nissan frontier? It just hit 175k, is that why it went off? Maybe timing is due?
1999 Nissan Frontier 2 Dr SE 4WD Extended Cab SB
-
Maintenance & Repair
What wrong when my serivce engine light cone on
2003 Nissan Altima 2.5 SL
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.