2011 Ford Ranger internal light problem
So the internal light in my 2011 Ford
Ranger wasn't working so I took it out and
replaced it, 12v 10W. The light works. But
now I have more issues. My indicators
don't flash when I lock and unlock the
vehicle like it use to. The alarm that the
lights were left on when the vehicle was
turned off no longer works, and the drivers
seatbelt light only flashes when I take my
belt off instead of staying illuminated.
Any ideas guys?
Did you disconnec the battery at anytime during this repair?
No. The lights that flash when I lock my car are the indicators. They work normally just not when I lock or unlock my car so haven't considered any fuses
I asked about the battery cause this sounds like a programming error in the BCM or GEM module, have you checked the menu settings via the cluster readout? If this is a base model you may have to go to the dealer and have it reflashed to get the programming reset.
Ok sounds along the right lines. I will take it into ford and let you know if this was the issue
Looking for a Used Ranger in your area?
CarGurus has 334 nationwide Ranger listings starting at $3,900.
Search Ford Ranger Questions
Ford Ranger Experts