2010 Chevy Impala will not move in drive
Have a 2010 chevy impala. Was at a stop sign, when I pressed the gas it
wouldn't move forward. I was able to drive the reminder of the way home in 2.
Reverse, 1 and 2 works fine. Just can not move in drive or 3. Please help.
Your transmission problem might be as simple as low or contaminated fluid, or even just a battery that's not putting out enough voltage to properly power the transmission controls. After you check these, you might have a defective shift solenoid. You didn't mention any warning lights, but if any are on, you might also have a bad speed sensor, or PCM..... This doesn't sound as dire as a trans replacement, but you should see a trans shop for service & repairs, if needed.
Thank you for your reply. The only thing my cars says is check the traction control and Stabilitralizer. I did get an oil change a couple weeks ago and they mention my battery was low. I’m definitely going to have it towed and checked