I HAVE A 2008 CHRYSLER 300 my problem is when I go to turn on the car I turn the key and it don't start right away I have to hold the key a couple of seconds for it to turn on then I let the key go.
Sometimes I turn the key, it turns on
quick ... Sometimes I turn the key
,hold it on a lil bit , and then let go,a
couple seconds later it turns on what
might the problem be ...is it a fuse , a
sensor ? A say a fuse or sensor
because when I first got the car I
needed a jump once and I didn't
know that the battery was in the
trunk not the front so I jump started it
from a positive post I found by a fuse
box it had a positive label on it do I
thought I would use that and i used
the metal body for ground and it
started the car in a weird way but
after that my car been acting funny
so any advice
You jumped your car properly... those posts are there for just such a thing. The ignition issue you're having sounds more like the switch itself. You may want to have it looked at. I had a Pontiac that had an issue like this and the car shut off while driving, so be careful. also your battery, I believe, like the sebring, is infront the driver side wheel well.
Did you try putting it in rice ?