Car will not make a sound when I turn the key

I just had the same problem .... I thought it was the battery so I got it changed it wasn't .... Believe it or not it was my key!! ... The sensor in my key died so it wud not start the car or light up my dash board when I put the key in ... Only the noise wud come on .... So u 100% need a new key it's gonna run u about $350 at dodge but I went to a lock smith he did it for $180

I had the same problem 2 days ago. I had the beeping sound and the lights would come on and I could not get the gears to move. But when I turned the key to on, it did nothing. In my case the WIN modular was loose and It needed to replaced. It costed me 346.00 in labor and FYI, Now the WIN modular comes with the key. that costed 410.00. My car will be ready in 1 to 2 days from today. Its all well worth it. O one more thing, if your tires locked make sure that the tow guy knows how to unlock the tires. the last thing you need is for some person go under your hood or even worse brake something in your car.

I have encountered a similar problem to my Dodge just recently was your key able to still lock and unlock the vehicle??

My key still unlock and lock all doors. But yet once I put the key into the ignition it does absolutely nothing. The interior light comes on as well and the door chimes once I put the key in. Any solutions charger owners??

Hey guys I have da same problem. I put my key in an a beep that's all .. It want start.. I will wiggle it for awhile about 10 min then sometimes it will start. But one I cut it off same old thing want start again.. Dashboard lights don't come on but door will unlock an lock with key remote..I already put a starter relay on it.. Stater an alternate good.. So Do this mean I need a new key sensor made.. Please some help me .. My car is just sitting in my drive..

I had this problem in a 2008 Avenger RT....the damn shifter isn't fully engaging in the "park" position, this was one of the problems. Try pushing up hard like you're trying to go into a position above the park position, while holding it there, put your key in and try starting it. Another issue I had is where the positive and negative jumper bolts are under the hood. They come loose, they wiggle and they stop the flow of power to the ignition at times. ANOTHER issue could be the security system like the other people said. It's easy to know if it's that though, a red light will come on, go off and then start flashing repeatedly if your wcm isn't detecting the key fob assigned to it, hence won't start or intermittently start. An easy way to tell if it probably your shifter park position sensor is if you've also ever had your key "stuck" in the ignition.