Mazda tribute wont start has something to do with ignition switch,already replaced, the. Switch has been changed the alarm is picking up the sensor. Off the key
6 Answers
If you see a red led light flashing after inserting key the immobilizer is still armed..anti-theft
DavidEaster answered 6 years ago
Car wont turn over new battery and starter been tested good
FordNut, how does one turn off the immobilizer? When I insert the key the red light stays flashing
i have this problem for a few years now, have changed ignition switch (electrical part), ignition cylinder, finally today changed the whole ignition lock module ( dealer sell this part for over $400, you can buy online under $150). Ford and Mazda have design flaws for these parts, they should not wear out so easily. Lesson : do not buy american cars, it is very costly.
Mine would not start and stall on me sometimes. Replacing transmission selecting gear switch didn't help, replacing ignition switch(electrical part) didn't work either! I decided to buy a ecm with uncut keys (already programmed) it's about $200.00 something after a thoroughly research and logical thinking! Bingo guys.
