the big nut from the water pump to the fan which way to remove clock wise or counter and how do i hold the pully in the water pump so it does not turn on me

Asked by cssr31 Mar 17, 2013 at 11:57 AM about the 2005 Dodge Durango Adventurer RWD

Question type: Maintenance & Repair

2005 durango 4.7L

19 Answers

175,825

Look downward behind the fan and you'll see a large nut (about 1 7/16") attaching the fan clutch to the water pump pulley. You have to turn this bolt counter clockwise while keeping the water pump pulley from turning. There are 3 possible ways to do this. 1) Press down hard on the serpentine belt and hope it keeps the pulley from rotating with the nut. 2) Take of the serpentine belt and use a strap wrench to hold the pulley. 3) Make your own tool taking advantage of the holes drilled in the water pump pulley to hold it in place. Once that nut is broken loose, DON'T REMOVE it yet. There are four bolts to remove on the fan shroud. Two on the top and two underneath. Take all four out, pop the shroud out from the radiator, and move it over the fan. Now take the fan clutch nut the rest of the way off and lift out the fan, clutch, and shroud together."

49 people found this helpful.
175,825

And this " I was able to get the fan clutch off using a 6" C-clamp on the water pump pulley and a 10" pipe wrench with the help of a cheater bar (metal pipe) for leverage on the pipe wrench. Crank the C-Clamp on as tight as possible on the water pump pulley but out of the way of the nut so you can lock the pipe wrench onto the nut. Use the pipe wrench and cheater bar to loosen the large fan nut. The pully (and C-clamp) will rotate initially until the C-clamp jams up against the engine block."

37 people found this helpful.
635

I just replaced mine last night without removing the belt or the shroud. I was able to get a vice grip tight enough to hold the pulley, but not tight enough to deny or damage the pulley. I placed this on the right side as you look down from the front of the truck. The vice grip straddled over the belt and did not grab it. I have a large crescent wrench that fit on the nut. It moved fairly easily. I also loosened the fan bolts before fully removing the entire assembly with some careful maneuvering. The replacement cluctch is designed with a shorter mounting nut, so getting it back in after reapplying the fan was a lot easier. I will replace the belt today.

13 people found this helpful.
635

I just realized the car in question is a Dodge Durango. I was replacing the clutch on a 1997 Dodge Ram 1500. I imagine it is similar,.

9 people found this helpful.
70

tenspeed...You are a genius! Thank you so much for making me feel dumber than I possibly could. LOL Excellent idea. Thanks again.

7 people found this helpful.
140

You don't have to take off fan cover. All you need is an Allen wrench or small chisel to stick in one of the 4 holes rotate untill locked up than use crescent wrench for fan nut. Take fan off and you have enough room to rest fan inside fan cover . I have used this same procedure to changs water pump on my 2000 dodge 1500 5.7 and 2006 dodge ram 1500 4.7. Only thing to take off is air filter, top serpentine belt and washer fulid/coolant reserve. Very simple but it can be hard if you listen to all this mumbo jumbo crap. I just done mine in under 1 hour total on my 06. For 2000 5.7 engine bottom radiator hose needs to come off. I've never had to take off all that other crap and I have owned many dodge trucks and a minivan. The 06 was the easiest of any I have done.

14 people found this helpful.
50

We have both attached right now but out of the truck! We cant get the Nut loose! Help plzzz

5 people found this helpful.
635

It is easier to remove the fan while the pump is still attached to the truck. Since you have it out, you need to chuck it in a vice somehow to secure the pully (I use vice grips to hold it while it is attached to the truck) and the fan nut turns counter clockwise.

3 people found this helpful.
50

Is there a particular size spanner I would need to break that fan clutch bolt loose?

5 people found this helpful.
20

Can someone plz tell me if the fan blades off if a clutch fan on a Dodge dorango will fit on a Toyota 4 runner?

2 people found this helpful.
40

I tried taking the fan off the water pump on an 03 ram 1500, broke the wrench!!! that sucker is on for life, lol

3 people found this helpful.
635

Well, you may have to remove it eventually. My truck is a 1997 with 287,000 miles on it and I just removed it again this past summer when I replaced the water pump, thermostat, thermostat housing, timing chain and gear. Is it locked in a vice or on the truck while you are breaking tools? : ) And, just to be sure, you are turning it the correct way, right? Counter clockwise as you look over the radiator and down at the fan assembly. I hope you get it!

2 people found this helpful.
40

I tried everything but heating it up. Rounded the 1/2" socket end of the wrench, then resorted to using the weight of the truck with a 3' pry bar wedged against two bolts through the pully, that's when the wrench end split open. If I have to change it, i'll try to get a fan from the salvage yard. It's an 03 w/250k on it.

1 people found this helpful.
635

Wow. Yep, you gave it your best! I had a dozen or so lug nuts across all 4 tires do me in once - on the same vehicle. I had to drill them off, and ended up replacing 4 or 5 lugs. Sometimes things just seize up.

Dodgeramfan I followed your method, I have to agree no special tools required thanks for the info

20

https://www.youtube.com/watch?v=LTqYTrCRvGk

2 people found this helpful.
30

2011 Dodge ram 1500, clockwise loosens the nut.

3 people found this helpful.
10

@jerry Thanks cause we are barely anywhere.. but what size for us? what size is our nut for ours?

1 people found this helpful.

Your Answer:

Durango

Looking for a Used Durango in your area?

CarGurus has 1,993 nationwide Durango listings starting at $7,999.

Postal Code:

CarGurus Experts

  • #1
    Sigurður Guðmundsson
    Reputation
    6,740
  • #2
    Breanskis
    Reputation
    3,670
  • #3
    tenspeed
    Reputation
    1,940
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Jeep Grand Cherokee
110 Great Deals out of 3,487 listings starting at $4,950
Used Dodge Charger
31 Great Deals out of 972 listings starting at $4,888
Used Chevrolet Tahoe
18 Great Deals out of 859 listings starting at $9,980
Used Ford Explorer
57 Great Deals out of 2,220 listings starting at $7,990
Used Chrysler 300
29 Great Deals out of 544 listings starting at $4,790
Used GMC Yukon
15 Great Deals out of 936 listings starting at $5,998
Used Dodge RAM 1500
86 listings starting at $7,995
Used Ford F-150
343 Great Deals out of 12,723 listings starting at $599
Used Chevrolet Silverado 1500
213 Great Deals out of 9,034 listings starting at $2,900
Used Toyota 4Runner
18 Great Deals out of 514 listings starting at $6,825

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.