THERMOSTAT HOUSING BOLTS BROKEN

Asked by paidrow Nov 18, 2016 at 03:09 PM about the 2004 Ford Explorer XLT Sport V6 4WD

Question type: Maintenance & Repair

Here goes another one of my favorite miserable moments...

In noticing a coolant leak on my 2004 Ford Explorer XLT 4x4 with a 4.0 v6 engine, I applied a coolant pressure test and quickly noticed the culprit of the discrepancy.  It was at the base of the thermostat lower half housing.  It is a fairly simple repair.  Three bolts and wua-la! Right?  Well, due the beautiful black cloud of misfortune that looms over me like an ex wife seeking more child support money, two of three bolts broke off.

Now, I know that most broken bolts require a drill and extractor tool to remove broken bolts.  However, I wonder if by performing this task perhaps the bolts break even more and further inside the block portion of the thread?

On the other hand, I wonder if it is possible to pull the entire thermostat assembly upward and off, leaving the broken bolts, or pieces thereof, exposed whereby they can be removed by use of vise grips or tools of the sort?

Any suggestions, recommendations and assistance is greatly appreciated.

Thanks.

3 Answers

F_O_R answered 7 years ago

If you can remove the third bolt then you could try vice grips. You could also cut the bolt head off to allow the upper housing to be removed. Good luck!

3 people found this helpful.
Mark helpful
73,310

OJ answered 7 years ago

If it is like my 2003 4.0, the thermostat housing is plastic. I'd try to break the housing (if just the head broke off the bolt) so I can get a pair of vice grips on the stud to unscrew it. Once the remaining studs are exposed, work gingerly with the vice grips as to not break off the remaining stud at the block. It should come out fairly easily, unless someone used loc-tite on the threads. If it does not unscrew fairly easily, apply some heat to the block area (make sure everything surrounding is metal). This should expand the inside thread slightly so unscrewing would be easier. The replacement housing (plastic) is about 90 bucks. They make an aftermarket one made of aluminum which holds up longer.

Mark helpful

F_O_R answered 7 years ago

I would apply penetrating oil to the threads and let it soak in for a while before trying to remove those bolts.

1 people found this helpful.
Mark helpful

Your Answer:

Related Questions

Explorer

Looking for a Used Explorer in your area?

CarGurus has 2,043 nationwide Explorer listings starting at $3,333.

Postal Code:

Shortcuts

Search Ford Explorer Questions

CarGurus Experts

  • #1
    OJ
    Reputation
    30,840
  • #2
    TransAm77
    Reputation
    7,790
  • #3
    Gene Arnett
    Reputation
    7,280
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Ford Expedition
21 Great Deals out of 652 listings starting at $5,650
Used Ford F-150
328 Great Deals out of 13,153 listings starting at $3,000
Used Jeep Grand Cherokee
109 Great Deals out of 3,537 listings starting at $4,950
Used Chevrolet Tahoe
10 Great Deals out of 826 listings starting at $698
Used Dodge Durango
63 Great Deals out of 1,897 listings starting at $6,987
Used Toyota Highlander
41 Great Deals out of 794 listings starting at $7,995
Used Toyota 4Runner
29 Great Deals out of 523 listings starting at $8,995
Used Honda Pilot
44 Great Deals out of 770 listings starting at $1,995
Used GMC Yukon
16 Great Deals out of 952 listings starting at $5,998
Used Ford Escape
143 Great Deals out of 3,987 listings starting at $3,999
Used Chevrolet Silverado 1500
210 Great Deals out of 8,295 listings starting at $6,995
Used Ford Mustang
57 Great Deals out of 1,634 listings starting at $6,977

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.