I have a 03 C5 Z06 my high beams work but the low beams won't come I checked the low beam fuses they are good and suggestions

I have a 03 C5 Z06 my high beams work but the low beams won't come I checked the low beam fuses they are good and suggestions 1 Answer

I have a c6 2005 corvette, will the automatic shifter bushings for your C5 fit in the shifter cable on my vette 1 Answer

I can't seem to find shifter cable bushings for my 05 corvette, will your bushings for the C5 work.

I have a 1960 Corvette that has sat unstarted for 3years but have no spark I've changed the condenser the coil new battery plugs and wires checked the fuses still no spark. What gives?? 2 Answers

I can not find anything obviously wrong

I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure

Hey all. I have a 1975 Corvette C3. I just did something stupid. I pulled my alternator to have it checked; however I did not disconnect the battery. As I disconnected the battery cable from alternator, it arc'ed badly. After having the alternator checked, upon reinstalling it, I have no power at all. I'm trying to determine which fuse, or relay, or whatever I have blown. Any help is appreciated. I do not have a fuse box layout. Thanks Apostle Smith 2 Answers

As stated in the subject question, but again, I have a 1975 Corvette C3. I ust did something stupid. I pulled my alternator to have it checked; however, I failed to disconnect the battery first, ...