1991 chevy suburban 5.7 V8 won’t start
The truck cranks but will not start. I
replaced the fuel pump has the right
pressure and hasn’t solid ground. I also
replaced the cap and rotor, ICM, Igniton
coil, the wires from the coil to the
distributor, plugs, and wires but still will not
start. Any ideas what needs to be replaced
or what could be the issue?
crank sensor it controls spark, timing
the senor might be located behind the crank pulley or runs off the fly wheel
Where can’t I get one? I can’t find it on rock auto
Also been told it doesn’t have one for it’s year
any auto parts store could be a dealer part only cause its over ten yrs old
the sensor is behind the starter remove the starter and the wire leading to the sensor will be there
youtube it and you will see
Did and couldnt find it though. I might try and call instead of trying to look online
you got to remove the starter
Looking for a Used Suburban in your area?
CarGurus has 386 nationwide Suburban listings starting at $1,995.
Search Chevrolet Suburban Questions
Chevrolet Suburban Experts