SubaruTech5862 answered 5 years ago
Is there damage causing the issue? Or just can't maneuver it out? Hard to help without seeing but may not be ideal or readily available to you but use a cutting torch and just split it in half or do you even have it separated from the hub maybe remove the entire knuckle so it's out of the way, and you could hold engine up with a cherry picker lossen mounts and lower assembly slowly until you have enough wiggle room.
I have a 94 Silverado that needs a drive shaft. What other year is interchangeable
1994 Chevrolet C/K 1500
-
Maintenance & Repair
Trying to remove driver side differential shaft won't come out due to hitting the frame
1995 Chevrolet C/K 1500 Cheyenne Extended Cab 4WD
-
Maintenance & Repair
My Husband has a 1992 Chevrolet K 1500. The drive shaft will not turn at all. It will go into gears but will not pull nor go into reverse. HELP!!
1992 Chevrolet C/K 1500
-
Maintenance & Repair
Had to replace head gaskets in my 350. HEI cap was marked for position from the outside and picture taken to ensure proper replacement. Cap and shaft were removed - plugs stayed hooked up and numbere...
1993 Chevrolet C/K 1500 Indy Pace RWD
-
Maintenance & Repair
Where is the cam shaft sensor on a 97 chevy c1500 5.0 located?
1997 Chevrolet C/K 1500
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.