migration_judge_roy answered 11 years ago
if they are still using delcotronic distributors, would suspect a worn distributer-
I'm thinking crank or cam angle sensor if either are bad it would run very rough or not at all. not to mention it also won't show misfire codes if either is bad or poss loose, full of debris . OBD II RESEARCH SENSORS TO SEE IF YOU HAVE THEM ON A 2K MODEL.
I have changed plugs and wires, air fliter , fuel fliter. I have no codes coming up on it.
2000 Chevrolet C/K 2500 LB HD 4WD
-
Maintenance & Repair
I need to know what rear end I have in my truck in order to purchase the correct drums for it
2000 Chevrolet C/K 2500 Extended Cab LB HD 4WD
-
Maintenance & Repair
changed wiring harness, distributor, rotor and cap it will turn over but not start. With the spark plug wires, where do you consider #1 on the distributor?
1993 Chevrolet C/K 2500
-
Maintenance & Repair
Own a 94 chev 6 lug 2500 truck. What am I missing on this truck compared to a 2500 8 lug HD. Frame, towing, drive train ext.
1994 Chevrolet C/K 2500 Cheyenne Extended Cab RWD
-
Maintenance & Repair
Changed plugs wires, air filter, fuel filter distributor cap
2000 Chevrolet C/K 2500 LB HD 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.